SPERIFILT 6/65 F5 MEDIA

Downdraft Spray Booth Media

General

Speritex ceiling diffusion media is available in a range of standard sized rolls and custom sized pads. Manufactured in Italy, Speritex media is used as an OEM diffusion pad in many Italian spraybooths such as Blowtherm, Nova Verta, CMC, Saima and others. Speritex media has proven to be the highest quality diffusion media available today. As the quality of paint spraybooths and painting techniques have progressed over the years, so has the quality of Speritex media.

The Sperifilt 6/65 media has progressively denser fibres as they approach the downstream side. All fibres of this media are totally impregnated with tackifier, and it has polyester netting on the air leaving side to obtain optimum efficiency.

Technical Data Sheet

• Initial pressure loss 25Pa
• Final pressure loss 450Pa
• Average arrestance 99%
• Average atmospheric efficiency 56%
• Dust holding capacity 428g/m2
• Thickness 24mm
• Media area 1.0m2
• Rated air flow 900m3/hr Max temperature allowed (peaks) 100°C
• Air velocity at test 0.25m/sec
• Efficiency class according to DIN EN 779 F5
• Fire resistance (DIN 53438) F1

The information provided on this web page is accurate at the time of printing to the best of Airepure Australia’ knowledge, however, it should not be relied upon. Circumstances differ with every installation and location therefore suitability of all Airepure products should be confirmed with a qualified Airepure Technical Representative. ©Airepure Australia 2012.