AirePleat G4 high capacity pleated panel filters are designed to provide sustained efficiency with a low pressure drop. Airepure has selected Kimberly-Clark INTREPID® 351H Pleat Filtration Media for AirePleat G4 air filter panels, which is 100% synthetic, so it will not absorb moisture or support microbial growth. It has a lower initial pressure drop than cotton-polyester and self-supporting pleat media which leads to energy savings during use.
AirePleat high capacity filters can easily upgrade existing flat panel or V-Form air filters currently being used with little or in some circumstances less in static pressure. AirePleat high capacity filters are available in nominal 25mm, 50mm and 100mm depths. All Airepleat high capacity 25mm and 50mm deep filters are rated as a G4 per EN779:2012
AirePleat disposable, pleated HVAC panel filters are suitable for variable air volume systems. Operating face velocity ranges are from 0 to 2.54 m/sec face velocity and can be used in most heating, air conditioning, or ventilating systems.
AirePleat high capacity disposable pleated filters are suitable as a primary filter installed into universal holding frames, side access applications and similar existing hardware. They may be used as pre-filters to extend the life of AirePak, PurePak, PureCell, Aireflow-V, and AireCell filters in these framing systems.
AirePleat high capacity “elements” and “rolls” are also offered. These are pleated sections of AirePleat media in selected widths with the metal backing for use in a re-useable metal frame (service pleat).
Important Features of Airepure AirePleat Panel Filters
The information provided on this web page is accurate at the time of printing to the best of Airepure Australia’ knowledge, however, it should not be relied upon. Circumstances differ with every installation and location therefore suitability of all Airepure products should be confirmed with a qualified Airepure Technical Representative. ©Airepure Australia 2016