Airepure’s AireFlow-HC HEPA filters are designed for high airflow applications requiring HEPA efficiency at a low initial pressure drop. The AireFlow-HC are designed to operate in systems with air velocities of 2.54 m/sec and a pressure drop of 248 Pascals.
AireFlow-HC HEPA filters are rated at H13 and H14 to EN 1822:2009.
AireFlow-HC HEPA filters have been manufactured from the highest quality of materials under strict quality control conditions, and are certified to ensure performance under the most critical of conditions for performance and leak-free operation.
Typical applications for AireFlow-HC HEPA filters include, medical facilities, universities, pharmaceutical manufacturing, research facilities, food and dairy processing facilities and in any application where ultra clean air and high velocities are a requirement.
Airepure’s AireFlow-HC HEPA Filter media is manufactured from moisture resistant micro glass fibre media, which is highly resistant to moisture in high humidity environments. This media is formed into mini-pleat media packs using a hot melt separator, and arranged into a V-bed configuration. These mini-pleat media packs are then fully potted into the frame casing with a urethane sealant.
The AireFlow-HC HEPA filter casing is manufactured from 1.6mm galvanised steel and consists of vertical support struts of the same material. These are then constructed into a box style frame arrangement. The vertical support struts provide additional sealing surface for the HEPA filter mini-pleat media packs, so they can be sealed around the entire periphery to the frame. This helps to provide strength and durability for high velocity applications.
Installation position, service side and direction of airflow can be in any direction.
Each AireFlow-HC HEPA filter is individually tested and certified to meet the customer’s requirements for resistance and efficiency. Each filter is labelled noting tested efficiency, pressure drop, rated airflow and serial number. AireFlow-HC HEPA filters have been designed to comply with the requirement of AS4260.1997. When used with correctly selected mounting frames or housings, AireFlow-HC HEPA filters will easily pass AS1807.6 & AS1807.7 Final Filter Integrity test carried out by a NATA registered laboratory.
For information on the Camfil range of quality HEPA product stocked nationally, please visit https://www.camfil.com/en-au/products/epa-hepa–ulpa-filters
The information provided on this web page is accurate at the time of printing to the best of Airepure Australia’ knowledge, however, it should not be relied upon. Circumstances differ with every installation and location therefore suitability of all Airepure products should be confirmed with a qualified Airepure Technical Representative. ©Airepure Australia 2020