Come and visit Airepure Australia at ARBS 2021 (Air Conditioning, Refrigeration Building Services Exhibition), to be held at MCEC (Melbourne Conference and Exhibition Centre) 15-17 February, 2021 Show Hours Monday 15 February 10am – 6pm Tuesday 16 February 10am – 6pm Wednesday 17 February 10am – 4pm We will be exhibiting at Stand 637/684/686/688.
Read on
Airepure ran a pre-conference training session and exhibited at the NZIHE (New Zealand Institute of Healthcare Engineering) annual conference, held at The Devon Hotel, New Plymouth. Airepure Director & Engineering Manager Kristian Kirwin ran this pre-conference training session for facilities engineers covering: current guidelines and standards (Australia/World) for hospital filtration/operating theatres (where they are heading, …
Read on
Airepure exhibited at the Australian Waste and Recycling Expo (AWRE) at ICC Sydney, Darling Harbour, where we showcased custom filtration and fume exhaust ventilation systems that effectively eliminate hazardous emissions and mitigate offensive odours. Strobic Air Tri-Stack Fume Exhaust Systems Strobic Air Tri-Stack mixed flow, jet plume, dilution exhaust fans, effectively eliminate hazardous emissions and odours, …
Read on
Airepure presented and exhibited at the 9th Annual ABSANZ Bio-safety and Bio-containment Conference, held at the Crown Conference Centre, Melbourne. “Practical methodology for the testing of HEPA filters in the field” was presented by National Engineering Manager, Kristian Kirwin, with and NATA accredited onsite testing technicians Justin Rowe and Nick Ristevski, demonstrating the following: Supply HEPA …
Read on
Airepure New Zealand exhibited at the trade night for the New Zealand Institute of Healthcare Engineering (NZIHE) 2018 Conference, held in Napier New Zealand. Airepure offer a range of products, services and consulting expertise that can assist with your compliance to relevant State Healthcare Guidelines and Australian/New Zealand Standards. Airepure articles previously published within Healthcare Facilities / Australian Hospital …
Read on
Airepure exhibited the 8th Annual Biosafety and Biocontainment Conference (2018), held in Wellington, New Zealand. A number of interesting conference themes were discussed, including: Lab acquired infections to include new diseases Targeted pathogen risk Training, governance and maintenance of training Biocontainment – including large animals (waste and decontamination) Macrobiological hazards Software updates: How we govern and maintain biosafety …
Read on
Airepure exhibited at the WIOA Victoria Conference and Exhibition, held in Bendigo. This event was hosted by the WIOA (Water Industry Operations Association of Australia). Airepure has 20 years’ experience in supplying specialty and engineered solutions to the environmental and waste water treatment market. Our products and services include: Large scale, certified FRP and stainless steel …
Read on
Airepure exhibited at ARBS 2018 in Sydney between 8th-10th May 2018 placed just across the aisle from the shared stand of sister company Fantech. Compliant and cost effective kitchen exhaust filtration Whether you were seeking a low capital-medium operating cost solution or high capital-low operating cost solution for kitchen exhaust filtration – Airepure had it covered. The Airepure Kaire Unit; a multi-staged, …
Read on
Airepure New Zealand exhibited at the trade night for the New Zealand Institute of Healthcare Engineering (NZIHE) 2017 Conference, which was held in Dunedin. Airepure offer a range of products, services and consulting expertise that can assist with your compliance to relevant State Healthcare Guidelines and Australian/New Zealand Standards. Airepure articles previously published within Healthcare Facilities / Australian Hospital …
Read on
Airepure exhibited at the 7th Annual Biosafety and Biocontainment Conference, held at Sea World Resort and Conference Centre, Gold Coast QLD from Monday 30th October to Friday 3rd November. Conference themes included: Lab acquired infections to include new diseases Targeted pathogen risk Training, governance and maintenance of training Biocontainment – including large animals (waste and decontamination) …
Read on
Airepure exhibited at the IHEA Healthcare Facilities Management Conference, from 11-13 October 2017 at the Pullman Melbourne, Albert Park. This event was hosted by The Institute of Healthcare Engineering, Australia (IHEA). Airepure articles previously published within Healthcare Facilities / Australian Hospital Engineer Journal (the official IHEA publication) include: “Design Considerations for Operating Theatre Ventilation Systems” …
Read on
Airepure Australia exhibited at ABSANZ 2016, the Australian Biosafety Conference in Melbourne, and presented a Poster entitled “Typical Bag-In/Bag Out (BIBO) Filter Change Out Procedure for the Flanders/CSC (or comparable) Side Access Housing”. A copy of this guide is available to download. Featured products included: a Flanders/CSC bag in/bag out containment housing c/w scan section, bubble tight dampers & gauges …
Read on
Airepure exhibited at ARBS 2016 in Melbourne between 17th-19th May 2016, placed just across the aisle from the shared stand of sister company Fantech and Air Design. The Airepure Australia stand featured a Flanders CSC bag in/bag out containment housing c/w scan section, bubble tight dampers & gauges; an exhaust air terminal containment module with pre-filter & 250 micron insect …
Read on
Again Airepure is booked in to travel around Australia and exhibit at various 2016 AIRAH Trade Nights. To date we have visited Coffs Harbour, Albury, Rockhampton, Perth, Darwin, Brisbane, Cairns, Townsville, Geelong, Canberra and Bendigo. Belinda Kelly, Stephen Wise and Jess Peatey from our Brisbane office are pictured above at the Airah Brisbane Trade night, which was held on July 7th. Paul Zeibots …
Read on
Airepure Australia exhibited at the Total Facilities Show at Melbourne Conference and Exhibition Centre. Featured products and solutions included: Airepure Panel and Bag Air Filters Airepure stock an extensive range of quality air filtration products, accessories and filter change out services – Australia wide. In stock items include: air filtration media, panel pre filters, extended …
Read on
Airepure Australia exhibited at the ABSANZ 2015 Conference in Canberra, and presented a Poster entitled “Typical Bag-In/Bag Out (BIBO) Filter Change Out Procedure for the Flanders/CSC (or comparable) Side Access Housing”. A copy of this guide is available to download. Featured products included a Flanders/CSC alternative containment technology (ACT) housing with manual dampers, a CS HEPA module and inline …
Read on
Seminar series covering aspects of compliance for manifolded laboratory exhaust systems, from hood to roof. Hosted by three companies who specialise in this field – Dynaflow, Phoenix Controls and Airepure Australia, this collaborative seminar was held in three cities in late October 2015 – Melbourne, Sydney and Brisbane. The attendees appreciated the factual information and the user perspectives …
Read on
Airepure has travelled around Australia this year, exhibiting at various 2015 AIRAH Trade Nights. It has been great to meet people in the HVAC industry. We have visited Bathurst, Perth, Darwin, Melbourne, Newcastle, Cairns, Townsville and Horsham. Stay tuned for details regarding the 2016 AIRAH Trade Nights.
Read on
Airepure Australia exhibits at Food Technology Queensland 2016 The Airepure Australia stand featured: ultra-clean air filtration products and NATA testing services to assist with your compliance to relevant ISO Cleanroom standards; HVAC filtration and particulate collection products custom specific solutions for hazardous or unpleasant odours, corrosion of electrical systems and process generated fume exhaust. Indoor Air Quality …
Read on
A series of seminars were presented in Brisbane, Sydney and Melbourne throughout July 2014. This was a unique opportunity to see a working twin fan Strobic Air Tri-Stack system, understand the capabilities & principles of the PLC control system & plenum dampers as well as gain hands on experience with the low vibration, sound & dilution …
Read on
Airepure Australia shared a stand with sister companies Fantech and Air Design at the ARBS 2014 expo held at the Melbourne Convention and Exhibition Centre between May 20-22 2014. The Airepure stand featured a complete small scale Strobic Air Tri-Stack™ unit and Smart Fan™ Control; a small scale Focus UCV unit, a range of innovative, …
Read on
Airepure exhibited again for ARBS 2012 in Melbourne, and it was great to have representatives from every national Airepure office in attendance. From Left: Noel Robertson, Shannyn Westwick and William Taylor (Melbourne), Stephen Wise (Brisbane), John Gojmerac (Canberra), Evan Morgan (Adelaide) and Paul Zeibots (Sydney). Products featured this year included Strobic Air Tri-Stack, CS HEPA modules, Focus UCV …
Read on
Airepure attended ARBS 2010 in Sydney. Products featured this year included Focus Ultra Clean Air Systems for Operating Theatres, Flanders CSC containment systems, HEPA’s and CS HEPA modules, PowerClean ESP systems, Purafil gas-phase media and general HVAC filtration such as panel filters and bag filters.
Read on
Airepure Australia along with Kevin D Kennard Snr of Duall USA ran a series of seminars during mid June 2009 in NSW, ACT and Victoria focusing on Hydrogen Sulphide, Wet Scrubbers, Bio-Scrubbers. Kevin being one of the leading authorities in the world in this field was able to show participants just how far Duall’s and …
Read on
In February 2009 Andy Weller of Purafil gave a series of presentations across the Eastern States of Australia relating to the Purafil GridBLOK – a ground breaking & revolutionary new filter that uses no bonding materials – it therefore has 100% of the carbon product available to deal with chemical contaminants. For turbulent air flows …
Read on
Airepure exhibited at ARBS 2006 in Sydney. Products featured included Purafil corrosion control, Powerclean ESP systems and Flanders filters
Read on
