PURECELL II

Extended Surface Mini-Pleat Rigid Filter

General

PureCell II extended surface mini-pleat rigid filters are space saving 100mm deep and designed for use in most commercial or industrial HVAC systems where medium to high efficiency filtration is required. The PureCell II has been designed to withstand the rigors of turbulent airflow and can remove contaminants such as smoke, bacteria, fume, fungi, and virus-bearing droplet nuclei. PureCell filters are available in MERV 11 (F6) to MERV 14 (F8) efficiencies.

The PureCell II is constructed from double-wall beverage board frames and water-laid micro-fine fiberglass media that is water-repellent, moisture resistant and will not support microbial growth. Designed to suit variable air volume systems or turbulent flow conditions, the slim-line 100mm depth and lightweight cartridge design make the PureCell II flexible for any installation and easy to store and handle.

Features

  • Moisture resistant filter media resists microbial growth
  • Space saving 100mm depth for installation flexibility
  • Lightweight, rigid cartridge is easy store and handle
  • Designed for variable air volume systems or turbulent flow conditions
  • MERV 11 to MERV 14 rating as per ASHRAE 52.2
  • Ideal as pre-filters for the Airepure HEPA filter range

The information provided on this web page is accurate at the time of printing to the best of Airepure Australia’ knowledge, however, it should not be relied upon. Circumstances differ with every installation and location therefore suitability of all Airepure products should be confirmed with a qualified Airepure Technical Representative. ©Airepure Australia 2012

PureCell_II
  • PureCell II
    PureCell_II
  • PureCell II (Half Size)
    PureCell_II_Picture_1

Check Product Availability