Airepure® AireCube and AireCone Deep Bed Filters are available in standard sizes with an efficiency of G4, F5 or F7 and are suitable for general purpose filtration applications in industrial and commercial applications. The AireCube and AireCone Deep Bed Filters are suited to noncritical applications or as a pre-filter to extend the life of the secondary filter.
AireCube and AireCone filter media’s are manufactured from bonded synthetic fibres and in the case of the F7 media an additional filter section is added of which is constructed of electrostatically charged polypropylene media. Both media’s are moisture and fungus resistant and will not shed fibres into the clean air stream; other efficiencies available upon request.
Airepure® can if required provide an all inclusive air filter maintenance, replacement media service upon request. Both filter types are easily changed out by simply disengaging the clips from the handles at the sides of the inner basket. The media may be removed together with the inner basket, or, if preferred, after the basket has been removed. The replacement media is then fitted over the inner basket, the peak of the media is then pushed down back into the inner basket. With the AireCone the ties on the peak of the media are then tied onto the frame of the inner basket at the front as illustrated in the picture. The assembly is then inserted back into the mounting frame, being careful to provide the correct seal between media and the mounting frame. If installed correctly the retaining clips are then able to be snapped back over the outer holding frame.
The information provided on this web page is accurate at the time of printing to the best of Airepure Australia’ knowledge, however, it should not be relied upon. Circumstances differ with every installation and location therefore suitability of all Airepure products should be confirmed with a qualified Airepure Technical Representative. ©Airepure Australia 2012-