AireCell 95 filters have been designed to provide a higher efficiency than standard “F” rated particulate filters (AS1324.1-2001), but where HEPA filtration is not a requirement.
AireCell 95 filters are rated at E11 to EN 1822:2009.
AireCell 95 filters have been manufactured from the highest quality of materials under strict quality control conditions, and are certified to ensure performance under the most critical of conditions for performance and leak-free operation.
Typical applications for AireCell 95 filters include, medical facilities, universities, pharmaceutical manufacturing, research facilities, food and dairy processing facilities and in any application where ultra clean air is a requirement.
The AireCell 95 filter construction is similar to that of the AireCell HEPA filter in that the casing is manufactured from 1.6mm galvanised steel of which is constructed into a double turned flange arrangement. The AireCell 95 filter media is manufactured from moisture resistant micro glass fibre media, which is highly resistant to moisture in high humidity environments. The media is then formed into closely-spaced pleats held apart by corrugated aluminium separators to ensure uniform airflow throughout the media pack. The media pack is then potted into place by urethane sealant into the casing.
Each AireCell 95 filter is individually tested and certified to meet the customer’s requirements for resistance and efficiency. Each filter is labelled noting tested efficiency, pressure drop, rated airflow and serial number.
The information provided on this web page is accurate at the time of printing to the best of Airepure Australia’ knowledge, however, it should not be relied upon. Circumstances differ with every installation and location therefore suitability of all Airepure products should be confirmed with a qualified Airepure Technical Representative. ©Airepure Australia 2015