CS HEPA MODULE

Gel Seal Ducted Terminal HEPA / ULPA Module

Description

The CS (Channel Seal) HEPA Ceiling Module is an ideal terminal HEPA filter module for pharmaceutical and biotechnology facilities, or for any other facility requiring clean-room level air filtration. The CS HEPA Ceiling Module has been designed so that HEPA filters can be replaced and tested without disturbing the module housing.

Standard Features

  • Galvanised housing powder-coated white on the inside. 304 Grade stainless steel fully welded HEPA filter retaining assembly.
  • Gel-seal design offers superior protection against bypass leakage.
  • 304 Grade stainless steel Perforated screen.40mm “Turned-up” edge provides superior sealing against varying ceiling types.
  • Includes a static pressure port for evaluating HEPA filter pressure drop, or sampling of the upstream aerosol concentration during filter scan testing.
  • 70mm Deep AirePanel CS Mini-pleat HEPA filter 99.99% to 0.30 micron

Optional Features

  • Fully welded construction in either galvanised, 304 or 316 Stainless Steel.
  • Full powder-coated finish.
  • Powder-coated swirl diffuser.
  • Adjustable butterfly damper
  • 100mm Deep AirePanel CS Mini-Pleat HEPA filter 99.99% to 0.3μm (lower initial pressure drop)
  • 70mm & 100mm AirePanel CS Mini-Pleat ULPA filters 99.9995% to 0.12 micron

The information provided on this web page is accurate at the time of printing to the best of Airepure Australia' knowledge, however, it should not be relied upon. Circumstances differ with every installation and location therefore suitability of all Airepure products should be confirmed with a qualified Airepure Technical Representative. ©Airepure Australia 2012